TA C-2 Standard

White High Poyler Modified Tile Adhesive

TA C2 STANDARD is a high polymer-modified, grey cement-based tile adhesive designed for fixing medium format tile/stone on interior walls/floors and exterior floors, with a bed thickness up to 6mm (extendable to 12mm in limited areas). The set adhesive is water resistant and suitable for use in showers and fully immersed situations such as swimming pools.

Standards

Conforms to IS 15477: 2019 Type 2T “Adhesives for use with Ceramic, Mosaic, and Stone Tiles” Conforms to EN 12004: 2017 and is classified as a normal cementitious adhesive (C1) with slip resistance (T) of class C1T.

Features

High bond strength Easy mixing, smooth application, and better workability Suitable for most common substrates and tiles Water resistant Enhanced flexibility and adhesion with cretebond- meta based emulsion .

TECHNICAL INFORMATION

#	Characteristic	Value
1	Bed Thickness	Up to 6 mm (suitable up to 12 mm in areas of limited extent)
2	Pot Life	3 hours
3	Setting Time	24 hours
4	Temperature Resistance	-30°C to 150°C
5	VOC Content	1.12 g/L

Properties as per IS 15477:2019@27 ± 2°CProperty with Test Method

#	Characteristic	Value
1	Tensile Adhesion Strength (as per Annex A)	Dry Condition: 1.00 N/mm² (Typical Result: >1.10 N/mm²) Wet Condition: 1.00 N/mm² (Typical Result: >1.00 N/mm²)
2	Shear Adhesion Strength (as per Annex B)	Dry Condition: 1.25 N/mm² (Typical Result: >1.25 N/mm²) Heat Aging Condition: 1.00 N/mm² (Typical Result: >1.10 N/mm²) Wet Condition: 1.00 N/mm² (Typical Result: >1.00 N/mm²)
3	Open time (as per Annex C)	As per Mftr. (Typical Result: 20 mins)
4	Adjustment time (as per Annex D)	As per Mftr. (Typical Result: 15 mins)
5	Slip (as per Annex E)	< 0.50 mm (Typical Result: 0.35 mm)

Properties as per EN 12004: 2017 @ 23 ± 2°CProperty with Test Method (as per Part 2)

#	Characteristic	Value
1	Tensile Adhesion Strength (Clause 8.3)	Initial: ≥ 0.50 N/mm² (Typical Result: > 0.90 N/mm²) After water immersion: ≥ 0.50 N/mm² (Typical Result: > 0.80 N/mm²) After heat aging: ≥ 0.50 N/mm² (Typical Result: > 0.80 N/mm²) After freeze-thaw cycles: ≥ 0.50 N/mm² (Typical Result: > 0.75 N/mm²)
2	Open time @ 20 mins:Tensile Adhesion Strength (Clause 8.1 & 8.3)	≥ 0.50 N/mm² (Typical Result: > 0.60 N/mm²)
3	Slip (T) (Clause 8.2)	≤ 0.50 mm (Typical Result: 0.30 mm)