Features
Low odor, cost-effective floor maintenance coating Enhances durability of concrete surfaces.
Substrate Preparation
The concrete surface must be hard, sound, and free of dust or other materials that could hinder adhesion, such as paint, lime coatings, plaster, curing agents, laitance, or adhesive residues. Use an appropriate degreaser to remove contaminants like polish, wax, grease, and oil before mechanical preparation. Contaminated surfaces should be mechanically prepared using methods such as scabbling, grinding, or shot blasting, followed by thorough vacuuming. For overwatered or weak concrete surfaces, ensure preparation down to solid, sound concrete. Joints or cracks in the concrete base where differential movement is expected should be addressed before the final application. New concrete slabs must cure for at least 30 days before applying IF 20 (WB).
Physical Properties
| # | Characteristic | Value |
|---|---|---|
| 1 | Pot life | 30 minutes |
| 2 | Time Between Coats | 8 – 24 hours |
| 3 | Foot Traffic | 24 hours |
| 4 | Full Cure | 7 days |
| 5 | Dry Film Thickness: | Approximately 100 microns per coat |
