CM 40P

Product Features

1. Pre-mixed and Ready-to-use: Just add water at the site.
2. High Durability:Provides a strong, long-lasting surface.
3. Self-Curing: Eliminates the need for water curing.
4. Reduced Wastage: Minimizes shrinkage, leakage, and cracks.
5. Consistent Quality: Automated blending ensures uniformity in every batch.
6. Easy Application: Enhances work efficiency with simple mixing and application.

Application Instructions

1. Surface Cleaning: Ensure the surface to be rendered is clean, free from dust, loose materials, grease, oil, and other contaminants.
2. Wetting the Wall:Thoroughly wet the surface for a few hours before application.
3. Mix Preparation:Add 6-7 liters of water to 40 kg of CM 40P and mix thoroughly.
4. Allow to React: Let the mixture sit for 5-10 minutes, then remix before use.
5. Mixing: Mix the mortar using a machine or by hand for 5-10 minutes until a uniform consistency is achieved.
6. Application: Apply the first coat with a thickness not exceeding 12-15 mm. Ensure the lower coat is thicker than the upper coat.
7. Second Coat: If applying a second coat, roughen the previous coat before it fully hardens to ensure better adhesion.
8. Leveling: After the final coat, use appropriate tools to ensure proper leveling.
9. Self-Curing: CM 40P is a self-curing plaster and does not require additional water curing.
10. Health and Safety Precautions: This product is non-toxic and non-hazardous. It is recommended to use gloves, a dust mask, and goggles during application. In case of contact with skin or eyes, wash with plenty of clean water. Seek medical attention if irritation persists.

Technical Specifications