Application
Using a flexible rubber squeegee, 50 or 70 durometer, apply Hybrid PU Based Colour Kote T-150 parallel to one of the sides of the area to be coated. Care should be taken not to leave ridges where adjoining applications overlap. Application in hot conditions (90°F or above) is improved by keeping the surface damp with a fine mist water spray. Additional applications should be installed at 90° to the previous application.
Surface Preparation
Surface must meet or exceed the American Sports Builders Association (ASBA) applicable Guidelines. Upgrading and recoating previously colored surfaces require the surface and base construction to be in sound condition and in compliance with the applicable ASBA Guidelines.
Physical Properties
| # | Characteristic | Value |
|---|---|---|
| 1 | Color | Refer to Carbolink’s Shade Card |
| 2 | Coverage Rate (undiluted) | 500 grams per sq. meter |
| 3 | Weight per gallon | 10.5 lbs. |
| 4 | Curing conditions | 70°F & 50% relative humidity |
| 5 | Estimated cure time | 72 hours minimum |
| 6 | Minimum ambient, surface & product installation temperature | 60°F and rising |
