Preparation and Application
PU Clear Coat T-70 should be applied on dry surfaces without rising humidity issues, free of materials that might prevent bonding such as dust, loose particles, and grease. Success in application depends on the proper preparation of the underlay and correct use of the material. Ensure good, dry cleaning of the surface from dust and residues using a vacuum cleaner and squeegees. It is important to maintain the temperature of the support surface and ambient air above 15°C during application and curing, while relative humidity should not exceed 75%.
Storage
Store PU Clear Coat T-70 in unopened containers in dry places with a minimum temperature of 5°C and a maximum temperature of 30°C, avoiding direct sunlight. The shelf life is 12 months.
Technical Characteristics
| # | Characteristic | Value |
|---|---|---|
| 1 | Density (25°C) | 1.05 g/cm³ |
| 2 | Viscosity (25°C) | 800-2,500 mPas |
| 3 | Application Temperature | 15-40°C |
| 4 | Curing (25°C) | 9-12 hours |
| 5 | Color | Refer to Carbolink’s color chart |
