Back

Product Properties

  • Two-component, solvent-free formulation.
  • Provides strong bond strength in dry, moist, and underwater conditions.
  • Suitable for marine environments.
  • Good resistance against impact loading conditions.
  • Exhibits excellent mechanical properties.
  • Functions as an effective waterproofing barrier.

Substrate PreparationConcrete

All surfaces must be smooth, sound, and free from contaminants such as oil, grease, dust, and loose particles. Concrete surfaces must be fully cured, free from laitance, and any traces of shuttering, release oils, and curing compounds. For old structures, remove existing paints thoroughly and clean all honeycombs to remove foreign materials using a pressurized water jet.

Steel

The steel surface must be prepared to SA 2½ in accordance with DIN 55928, part 4, and must be free from rust and contaminants. Shot blasting with quartz-free abrasives, sand-blasting, or other suitable techniques is recommended.

Application

EP 21 P should be applied using a glove-protected hand, spatula, or trowel. The mixed material should be placed properly and evenly on the prepared substrate, and finished by slight rubbing with wet gloves.

Product Characteristics

#CharacteristicUnitValueComments
1Mixed DensityKg/l1.55Kg/l
2Mixing Ratiop.b.w1:1Resin: Hardener
3Pot Lifemin50100g at 30°C, per FIP 5.1
4Compressive StrengthN/mm²>20 (1 day), >25 (3 days)ASTM C579
5Bond StrengthN/mm²>2.5 (3 days)EN-1542
6Slant ShearN/mm²>10 (3 days)ASTM C882
7Tensile StrengthN/AConcrete FailureFIP 5.14
8Application Condition°C+5 to +40 (Substrate, Ambient, Material Temperature)
9ColourN/AGray
10Cleaning AgentN/AEP 21 P (Water or water-based cleaners must not be used)
11DeliveryN/A8 kg
12Shelf LifeN/A12 monthsIn original sealed packaging at +5°C to +30°C
13StorageN/ADry conditionsSame requirements apply for transport
13DisposalN/ACompletely empty packs

Technical Data Sheet

Material Safety Data Sheet