Features
Toxic-free and solvent-free for safe interior applications. Exceptional resistance to wear and abrasion, ensuring longevity. Excellent slip resistance suitable for both vehicular and foot traffic. Compatible with cementitious toppings and applicable on damp concrete surfaces. Provides the combined strength of both cement and epoxy.
Application
Apply the mixed IF 25 CU material to the prepared and primed surface immediately using a gauged notched trowel or depth-set rake to achieve the desired thickness. Complete one kit application (troweling and rolling) within 8-10 minutes at 30°C, including mixing time. After laying IF 25 CU, gently roll the surface with a spiked roller to release any entrapped air and smooth out any trowel marks. Avoid excessive rolling; one-time rolling in both directions is sufficient. Protect the work area during installation and initial curing to prevent contamination by debris, which could cause blemishes on the hardened surface.
Physical Properties
| # | Characteristic | Value |
|---|---|---|
| 1 | Pot life | 30 minutes |
| 2 | Mixed Density | 1.77 – 1.82 g/cc |
| 3 | initial Hardness | 24 hours |
| 4 | Full Cure | 7 days |
| 5 | Application Thickness | 2-4 mm |
| 6 | Mixing Ratio | As specified on the container |
| 7 | Bond Strength | After 7 Days: >1.5 N/mm² After 28 Days: >2.5 N/mm² |
| 8 | Compressive Strength | After 7 Days: 26.00 N/mm² After 28 Days: 31.00 N/mm² |
| 9 | Tensile Strength | After 28 Days: 3.8 N/mm² |
| 10 | Flexural Strength | After 28 Days: 8.00 N/mm² |
| 11 | Shore D Hardness | After 28 Days: >70 |
| 12 | Coverage Estimates | Coverage: Approximately 7.0 m² @ 2 mm thickness |
