Features
Hard wearing – durable with low maintenance costs Good abrasion resistance, withstands foot and vehicular traffic Resistant to a wide range of chemicals and liquids Seamless – easily cleaned to maintain high standards of hygiene Self-smoothing properties provide a flat, high-gloss finish Hygienic.
Application
Apply the mixed IF PUSL 10 D material to the prepared and primed surface without delay, using a trowel or depth set rake to achieve the desired thickness. As the material is laid, gently roll the surface with a spiked roller to release any entrapped air and to blend out trowel marks. Protect the work area during installation and the initial curing process to prevent contamination by debris, which could result in blemishes on the finished surface.
Physical Properties
| # | characteristic | value |
|---|---|---|
| 1 | Pot life | 20 mins |
| 2 | Mixed Density | 1.33-1.43 g/cc |
| 3 | Initial hardness | 24 hours |
| 4 | Full cure | 7 days |
| 5 | Application Thickness | 1 mm |
| 6 | Shore D Hardness | >70 |
| 7 | Bond Strength (after 1 day) | > 1.50 N/mm² |
| 8 | Compressive strength | > 90.0 N/mm² |
| 9 | Flexural strength | > 60.0 N/mm² |
| 10 | Tensile strength | > 24.0 N/mm² |
| 11 | Mixing Ratio | As specified on the container |
