Prime ET 32

Prime ET 32

Two-Component Etch Primer

CLI Prime ET 32 is a two-component Zinc Tetroxy Chromate based low viscous etch primer. It prepares the surface for good bonding to galvanized sheets and primes the metal surface on which it is applied. It conforms to IS:5666.

Advantages

Better adhesion and flexibility
Etches the metal surfaces

Application

Galvanized or metal sheet

Application Methodology

Ensure that the surface is clean before applying CLI Prime ET 32. Remove any dirt, oil, grease, etc. Mix Component A into Component B
and stir thoroughly to achieve a homogeneous mix. Apply CLI Prime ET 32 by brush, conventional, or airless spray.

Characteristics

Pot Life: 10-15 minutes
Recoating Time: 24 hours max
DFT: 8-12 microns
Surface Dry at 30°C: 25-45 minutes
Theoretical Coverage: 8-10 m²/L/coat
Mixing Ratio: 1:1