ADVANTAGES

• Acts as bond breaker and form cleaner.
• Eliminates voids, defects, build-up of concrete and mortar & provides fair finished exposed concrete.
• Non-staining will not wash off.
• Protects steel forms from rusting.
• Cuts clean-up time.
• Economical & easy to use.
• Protects plywood forms from bulging due to water absorption, thus increases the number of re-uses.
• Stripping of forms / de-shuttering becomes easy without hooking, thus increases shutter’s life.

APPLICATION

• Can be applied on metal, wood, plastic and fiberglass forms.
• Precast moulds & plywood.
• Equipment maintenance-scoots, buckets hoist and paving machines.

APPLICATION METHODOLOGY

• Remove dust, flakes, or other foreign particles by jet or dry air and clean the surface mechanically or with wire brush to ensure removal of loose rust particles.
• Stir the container well for removal of settlement, if any.
• Use CLI SO 42 directly from container.
• Use ShaliSlip directly from container.

CHARACTERISTICS

HEALTH & SAFETY

• Use goggles and hand gloves during application.
• Clean hands with warm soap water after application.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice. Do not use solvent to clean the contacted area.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• If swallowed seek medical attention immediately. Do not induce vomiting.

PACKING

Available in 20 L and 200 L drum.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat.The product shelf life is12 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.