ADVANTAGES

• Quick Setting
• Good durability, adhesion
• Environment Friendly
• Increased workers safety
• Easier, safer cleanup
• Significantly reduces disposal cost
• Very low VOC
• Easy repainting operation
• Meet Federal Specification – TT-P-1952D

APPLICATION

• It can be applied on bitumen and concrete pavement with a spray applicator or by brush.
• Can be applied on Zebra Crossing, path dividers, speed breakers and other similar markings.

APPLICATION METHODOLOGY

• Remove dust, flakes, oil / grease or other foreign particles by jet or dry air and clean the surface.
• Remove any lime, distemper or acrylic coating prior to apply RM 30P.
• Ensure that surface is sound, firm, bone dry.
• Minimize dusting of the material during use.
• Add RM 30P in application unit in case of spray application.
• Mark reference line on surface with nylon rope and chalk prior to application.
• Apply RM 30P within the reference lines by the application unit.
• Dispensed Type I glass beads (BS 6088 B) shall be dispensed from the in-built dispenser of application unit @ 250- 300 Grm / Sq.M simultaneously.
• Finish lines shall be true to level, uniform and free from streaks.
• If the application can not be done using application unit, approved manual method shall be adopted.
• Proper safety measures shall be taken to ensure smooth progress of work.

CHARACTERISTICS

HEALTH & SAFETY

• Minimize dusting of RM 30P during use.
• Use goggles, mask, nose cover and hand gloves during application.
• Clothing while handling the material is recommended.
• Clean hands with warm soap water after application.
• Do not inhale RM 30P or fumes, do not ingest.
• Avoid eye contact, if contacted, wash copiously with water.
• Contact of molten product with skin would lead to thermal burns, flush with cold water, do not remove material as it would lead to severe tissue damage.

PACKING

Available in 20 L Pail.

STORAGE AND SHELF LIFE

Keep in cool and dry place, under shed, away from heat. The shelf life is 12 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.