ADVANTAGES

• Excellent durability to all types of chemical environment.
• Excellent inter-coat bonding.

APPLICATION

• As anti-corrosive primer on steel surfacest.

APPLICATION METHODOLOGY

• Oil and grease on the steel surface must be removed using suitable method, salts and other contaminants by (high pressure) fresh water cleaning prior to blasting.
• After blasting, clean the surface carefully from abrasives and dust.
• Abrasive blasting is the most effective method.
• Ensure surfaces are completely dry in depth and free of dirt, oil, grease or other contamination.
• On old steel surfaces having been exposed to salt water, excessive amounts of salt residues in pitting may call for wet abrasive blasting followed by dry abrasive blasting.
• CLI Prime - RO 41 may be over coated with conventional paints or two-pack epoxy paints/Polyurethane paints. Over-coating can be done after 6 – 8 hrs; however, it is recommended to coat after 12 - 24 hrs of application of primer to obtain superior performance .

CHARACTERISTICS

HEALTH & SAFETY

• The product should not come in contact with the skin and eyes, or be swallowed.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Wear suitable protective clothing, gloves and eye protection.
• In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
• In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
• If swallowed seek medical attention immediately - do not induce vomiting.

PACKING

Available in 20 L container.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat. The shelf life of product is 12 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.