ADVANTAGES

• Outstanding abrasion resistance.
• Excellent acids and alkali resistance.
• Low VOC system.
• Can be used on steel, concrete and epoxy mortars.

APPLICATION

Recommended for structural steels , tank linings, battery storage areas, pulp and paper mill, coke oven plants, waste water treatment plant, mines and marine installations.

APPLICATION METHODOLOGY

• Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface to make it smooth before applying CLI COAT AC 30.
• Surface of steel must be prepared as per the NACE or SSPC guidelines. Concrete surface should be sound and 28 days cured . Use suitable primer for priming the concrete surface and CLI Prime Zn 30 for metal surface.
• Both the components should be stirred separately before mixing with a hand drill type spiral stirrer. This is to disperse all the fillers which might settle in the can.

CHARACTERISTICS

HEALTH & SAFETY

• Use goggles and hand gloves during application.
• Clean hands with warm soap water after application.

PACKING

Available in 18 L packing (12 L & 6 L) consisting of Component A & B.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.