Pipe Sleeve

Designed to Prevent Water Ingress and Ensure a Secure, Watertight Seal.

Special gaskets for piping made of non-woven fabric with a sealing membrane in the centre, designed for waterproofing pipes of different diameters. The substrate consists of two external layers of non-woven polyethylene and a coating membrane in modified TPE.

Available Pack Sizes

-

Coverage

-

Application Areas

For permanent sealing of wall and floor pipe passages in combination with embedding materials, underneath ceramic tiles or natural stones, in both outdoor and indoor construction such as bathrooms, showers, balconies, and terraces. It is highly resistant to hydrostatic pressure, vapor permeable, tear-proof, and chemical resistant, with excellent performance in temperature variations.

Technical Data Sheet(TDS)
MSDS
Order Now
Material Composition

Substrate: Both sides 50g PES non-woven
Sealing Zone: TPE (aging resistant)
Dimensions:
250 mm x 250 mm, hole: 110 mm
150 mm x 150 mm, hole: 75 mm
120 mm x 120 mm, hole: 50 mm
Thickness: 0.60 mm
Temperature Resistance: -30°C to +90°C

Physical Properties
# Characteristic Value
1 Breaking Load Longitudinal 181 N/20 mm
2 Breaking Load Lateral 31 N/20 mm
3 Tensile Strength Longitudinal 14.1 MPa
4 Tensile Strength Lateral 2.4 MPa
5 Extension Break Longitudinal 124%
6 Extension Break Lateral 40%
7 Power Absorption at 25% Elastic Lateral 95 J/m²
8 Power Absorption at 50% Elastic Lateral 295 J/m²
9 Water Pressure Resistance >1.5 bar
10 UV Resistance 500 hours
Chemical Properties (after 7 days storage at room temperature)
# Characteristic Value
1 Hydrochloric Acid +
2 Sulphuric Acid +
3 Citric Acid 100g/l +
4 Lactic Acid 5% +
5 Potassium Hydroxide 3% +
6 Sodium Hypochlorite 0.3 g/l +
7 Salt Water NaCl (20 g/l) +
8 KOH 3% 40°C (28 days) +
Substrate Preparation

Preparation of the substrate should be done according to the sealing system used.

Sale Information and Disposal

This product is not classified as hazardous. It can be disposed of as building waste.

Cleaning of Tools

Clean tools and soiled areas immediately after use with water.

Information on Processing

The tape ensures excellent compatibility and good adhesion with polymer dispersions, flexible mineral sealing compounds, and thermosetting resins. Conduct a compatibility test before applying other products.

Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety