Features
Flexible: accommodates normal building movement. Reflects the intense solar heat with an Solar Reflectance Index (SRI) of 103. Provides excellent UV resistance and long-term protection from elements of nature.
Application
Substrate Preparation
Characteristics of Cured Membrane
#
Characteristic
Value
1
Tensile Strength
> 3.0 MPa
2
Elongation at Break
3
Solar Reflectance Index ASTM E 1980-11
>100%*
4
Emissivity
>0.9*
5
Solar Direct Reflectance
>0.8*
6
Overcoat Time
4hrs @ 23°C, 50% RH
7
Dry Through (2nd Coat)
24hrs @ 23°C, 50% RH
8
Application Temperature
10°C - 35°C (surface temp)
9
Service Temperature
0°C - 60°C
10
VOC
Low
11
Water Absorption
< 25% after 72 hours
Physical Properties
#
Characteristic
Value
1
Temperature
@27+/-1°C
2
Characteristics of Liquid
Viscous Liquid
3
Specific Gravity
Approx. 1.3
Data Reliability
All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.
Regional Compliance
Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.
Legal Disclaimer
The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.
