Hybrid PU Based Resurfacer SF 201 |PU based Resurfacer for recreational surfaces

Hybrid PU Based
Resurfacer SF 201

PU based Resurfacer for recreational surfaces

Carbolink's Hybrid PU Based Resurfacer SF 201 is a high-performance, full-bodied acrylic latex coating fortified with fillers. It is available in colors specifically blended for use on various sports flooring installations.

Available Pack Sizes

23Kgs

Coverage

900 grams per sq. meter

Application Areas

-

Technical Data Sheet(TDS)

MSDS

Order Now

Application

Using a flexible rubber squeegee, 50 or 70 durometer, apply Hybrid PU Based Resurfacer SF 201 parallel to one of the sides of the area to be coated. Care should be taken not to leave ridges where adjoining applications overlap. Application in hot conditions (90°F or above) is improved by keeping the surface damp with a fine mist water spray. Additional applications should be installed at 90° to the previous application.

Surface Preparation

Base Construction Surface must meet or exceed the American Sports Builders Association (ASBA) applicable Guidelines. Upgrading and recoating previously colored surfaces require the surface and base construction to be in sound condition and in compliance with the applicable ASBA Guidelines.

Physical Properties

#	Characteristic	Value
1	Color	Refer to Carbolink's Shade Card
2	Coverage Rate (undiluted	900 grams per sq. meter
3	Weight per gallon	10.5 lbs
4	Curing conditions	70°F & 50% relative humidity
5	Estimated cure time	72 hours minimum
6	Minimum ambient, surface & product installation temperature	60°F and rising

Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.