Acrylic Base Coat SF 111|Sand Prefilled Acrylic based Base Coat| Carbolink

Acrylic Base Coat SF 111

Sand Prefilled Acrylic based Base Coat

Carbolink Acrylic Base Coat SF 111 is a high-performance, full-bodied acrylic latex coating, fortified with fillers, and available in colors specifically blended for use on outdoor sports surfaces.

Available Pack Sizes

30kgs & 25kgs

Coverage

900 grams/m²

Application Areas

-

Technical Data Sheet(TDS)

MSDS

Order Now

Application

Using a flexible rubber squeegee (50 or 70 durometer), apply Acrylic Base Coat SF 111 parallel to one of the sides of the area to be coated. Avoid leaving ridges where adjoining applications overlap. In hot conditions (90°F or above), keep the surface damp with a fine mist water spray. Apply additional coats at a 90° angle to the previous application.

Indoor Application Curing

Drying times are extended by high humidity, cool temperatures, or lack of air movement. This is especially important indoors, where these factors are often pronounced.

Physical Properties

#	Characteristic	Value
1	Color	Black
2	Coverage Rate (undiluted)	900 grams/m²
3	Weight per Gallon	10.5 lbs.
4	Curing Conditions	70°F & 50% relative humidity
5	Estimated Cure Time	72 hours minimum
6	Minimum Ambient, Surface & Product Installation Temperature	60°F and rising

Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.