PU Clear Coat T-70

PU Clear Coat

PU Clear Coat T-70 is a polyurethane, single-component, solvent-based, semi-matte finish aliphatic coating designed for outdoor sports surfaces. It is used as a final, sealing layer on playground floorings made of SBR rubber granules plus PU binder mixture, EPDM plus PU binder mixture, safety tiles, and polyurethane outdoor/indoor sports systems such as SPU K-17/10+2mm PU System.

Available Pack Sizes

5kgs

Coverage

Polyurethane floorings: 150-200 g/m²
Running tracks or EPDM surfaces: 400-500 g/m².

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Preparation and Application

PU Clear Coat T-70 should be applied on dry surfaces without rising humidity issues, free of materials that might prevent bonding such as dust, loose particles, and grease. Success in application depends on the proper preparation of the underlay and correct use of the material. Ensure good, dry cleaning of the surface from dust and residues using a vacuum cleaner and squeegees. It is important to maintain the temperature of the support surface and ambient air above 15°C during application and curing, while relative humidity should not exceed 75%.

Storage

Store PU Clear Coat T-70 in unopened containers in dry places with a minimum temperature of 5°C and a maximum temperature of 30°C, avoiding direct sunlight. The shelf life is 12 months.

Technical Characteristics
# Characteristic Value
1 Density (25°C) 1.05 g/cm³
2 Viscosity (25°C) 800-2,500 mPas
3 Application Temperature 15-40°C
4 Curing (25°C) 9-12 hours
5 Color Refer to Carbolink's color chart
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety