Advantages
Application Methodology
Before applying RM 60P, ensure the surface is clean, free from oil, dirt, debris, paint, and unsound concrete. Apply RM 60P using a brush, roller, or spray. If the surface is porous, a second coat may be necessary. Allow the primer to dry thoroughly. If the primer becomes hard dry, it is recommended to recoat it to ensure good bonding with RM 60P. Finally, apply the thermoplastic road marking paint on the dried primer surface.
Storage and Shelf Life
Store RM 60P in a cool, dry place away from heat sources. Properly stored in its original, unopened container, the product has a shelf life of 12 months.
Characteristics
#
Characteristic
Value
1
Viscosity (B4 Cup, 23°C, min)
20 seconds
2
Specific Gravity at 23°C, min
0.95
3
Flash Point (Abel's Closed cup, min)
23°C
4
Coverage
10-12 m²/L depending on the surface
5
Drying Time (max)
15 minutes
6
Volatile Matter (max)
80%
Data Reliability
All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.
Regional Compliance
Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.
Legal Disclaimer
The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.
