RM 33P

Thermoplastic Road Marking Paint

RM 33P is a hot applied, petroleum resin-based thermoplastic road marking paint that offers superior weathering resistance and color stability. The pre-mix and drop-on glass beads ensure long-lasting retro-reflectivity. It is easy to melt and can be applied on both asphalt and concrete surfaces.

Available Pack Sizes

25 Kgs

Coverage

0.12 to 0.15 kg/m²

Application Areas

Applicable on bitumen and concrete pavement. Suitable for Zebra Crossings, path dividers, speed breakers, arrows, and other similar markings.

Technical Data Sheet(TDS)
MSDS
Order Now
Advantages
  • High visibility, durability, adhesion, and skid resistance.
  • Fast-drying properties.
  • Superior color brilliance.
  • Environmentally friendly.
  • Economical.
Product Information

Color: White & Golden Yellow
Handling & Storage: Store under cover, out of direct sunlight, and protect from extremes of temperature. In tropical climates, the product must be stored in an air-conditioned environment. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
Packaging: Available in 30 kg HDPE packs.
Shelf Life: 12 months from the date of manufacture when maintained in protected storage in original, unopened sealed condition at 5 - 38°C.
Handling Precautions: As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin, and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention. Keep away from children and animals. Reseal containers after use.

Application Information

Substrate Temperature: +5°C Min / +40°C Max
Ambient Temperature: +5°C Min / +40°C
Packaging: Available in 30 kg HDPE packs.
Max Humidity:< 80%

Technical Characteristics
# Characteristic Value
1 Color White & Yellow
2 Specific Gravity 2 ± 0.02
3 Softening Point, °C 102 ± 9.5
4 Luminance @ 45°C For White: >85% ,For Yellow: >65%
5 Flow Resistance, % < 25
6 Flash Point, °C 270
7 Drying Time, minutes, Max 15
8 Dellowness Index for White < 0.05
9 Drying Time, minutes, Max. For 2.0 mm thickness: 4.00 - 4.50
For 2.5 mm thickness: 5.00 - 5.50
Coverage may vary depending on surface condition.
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety