Advantages
RM 30 P is an environmentally friendly product, being water-based. It offers quick setting, good durability, and adhesion. The product
enhances safety, is easy to repaint, and significantly reduces disposal costs due to its low VOC content. Additionally, it ensures easier
and safer cleanup.
Surface Preparation
Ensure that the surface is fully cured, clean, structurally sound, and dry. Remove all loose gravel, dirt, oil, grease, and foreign matter
using a jet of dry air. If there is any pre-existing line, it should be removed before applying RM 30 P. For new concrete roads, ensure the
concrete is at least 28 days old. The substrate temperature should be between 10°C and 40°C, with humidity below 80%. There should
be no standing water in the area of application. If sandblasting is not possible, mechanical grinding of the surface is acceptable. Saw
cut the area to be repaired in a geometrical shape.
Material Preparation
Stir RM 30 P thoroughly to ensure uniformity.
Application of Material
Mark reference lines on the surface using nylon rope and chalk prior to application. Apply RM 30 P within the reference lines using an
airless spray, roller, or brush. For airless spray application, ensure nozzle pressure is between 1800 and 2200 psi, with an orifice size
ranging between 10 thou to 23 thou. Ensure the finish lines are uniform and free from streaks. Take appropriate safety measures to
ensure smooth progress of the work.
Health & Safety
Avoid contact with skin and eyes, and avoid swallowing the product. Ensure adequate ventilation
and avoid inhalation of vapors. Wear suitable protective clothing, gloves, and eye protection. In case of contact with skin, rinse with
plenty of clean water, then cleanse with soap and water. Do not use solvents to clean the contacted area. If the product comes into
contact with eyes, wash immediately with plenty of clean water and seek medical advice. If swallowed, seek medical attention
immediately. Do not induce vomiting.
Packing
Available in 20 L packs, with required glass beads in a separate pack available upon request.
Storage
Store in a cool, dry place in airtight containers, under a shed, and away from heat sources.
Shelf Life
12 months in original, unopened, sealed condition.
Characteristics
#
Characteristic
Value
1
Color
White / Golden Yellow / Lane Red / Black
2
Specific Gravity
1.50 - 1.60
3
DFT (Dry Film Thickness), Micron, un-beaded
30 - 40
4
Finish
Smooth and Matte
5
Drying Time at 27°C
Surface Dry: 20 minutes Hard Dry: 50 minutes
6
Theoretical Coverage
10 - 13 m²/L
7
Volume Solid
35 ± 2%
8
VOC Content
<30 g/L
Data Reliability
All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.
Regional Compliance
Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.
Legal Disclaimer
The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.
