This product is ideal for internal coatings of potable water pipelines and storage facilities.

Prepare the surface by mechanical grinding or shot blasting, conforming to SA 2½ standards. Remove dust, flakes, oil, grease, or other loose foreign particles by sandblasting, iron brushing, or using compressed air. Stir drums of each component thoroughly for uniformity. For best results, use a variable speed drill mixer with a spiral-type blade at the bottom of the stirrer rod at 400-600 rpm. Preheat Part A to 50-65°C and Part B to 25-40°C. Apply CLI Guard 40 using a plural feed airless spray gun to achieve the required thickness on the substrate. Adjust the tip pressure to 2500-4000 psi for good atomization, typically using a tip size of 19-25 Thou orifice. For coating repair, use a brush application with the same material, ensuring that Component A and Component B are mixed as per the requirement of the repair job. Heating of individual components is not necessary for repair jobs.