EP 300

Epoxy Bonding Agent

EP 300 is a two-component, water-based epoxy Phenalkamine sealer and binder designed for sealing surfaces and providing a strong bond to difficult or inadequately prepared surfaces.

Available Pack Sizes

30Kgs, 15Kgs & 1.5Kgs

Coverage

8-14 m²/litre/coat, depending on substrate porosity

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Advantages
  • Can be applied to wet or damp surfaces that are free from running or ponding water.
  • Suitable for freshly laid hardened (green) concrete.
  • Tolerant to improperly prepared surfaces.
  • Seals and binds dusty or loosely bound surfaces.
  • Excellent adhesion to a variety of substrates, including brick, masonry, concrete block, compressed fibreboard, stone, and timber.
Features & Benefits

Safe application on damp surfaces.
Effective on green concrete.
Consolidates weak or rain-affected concrete for a solid substrate.
Excellent penetration into fine-grained substrates like high-strength concrete.
Tolerant to poorly prepared surfaces.
Non-flammable with negligible odor.
Easy equal-part mixing ratio.
Water-thinned and easy cleanup.
Safe for use in sensitive areas such as around food or habitable spaces.

Technical Specifications
# Characteristic Value
1 Colour Red colored transparent
2 Finish Clear gloss, darkens and matures with age
3 Volume-Solids 22 ± 2%
4 Mixing Ratio 1:1 (Part A / Part B) by volume
5 Pot Life 4 hours @ 25°C
6 Number of Coats 1-2, depending on the application purpose
7 Recoat Time 1.5 hours @ 25°C & 50% R.H
7 Full Cure 7 days @ 25°C & 50% R.H.
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety