• Two-component, solvent-free formulation.
• Provides strong bond strength in dry, moist, and underwater conditions.
• Suitable for marine environments.
• Good resistance against impact loading conditions.
• Exhibits excellent mechanical properties.
• Functions as an effective waterproofing barrier.

All surfaces must be smooth, sound, and free from contaminants such as oil, grease, dust, and loose particles. Concrete surfaces must be fully cured, free from laitance, and any traces of shuttering, release oils, and curing compounds. For old structures, remove existing paints thoroughly and clean all honeycombs to remove foreign materials using a pressurized water jet.

The steel surface must be prepared to SA 2½ in accordance with DIN 55928, part 4, and must be free from rust and contaminants. Shot blasting with quartz-free abrasives, sand-blasting, or other suitable techniques is recommended.

EP 21 P should be applied using a glove-protected hand, spatula, or trowel. The mixed material should be placed properly and evenly on the prepared substrate, and finished by slight rubbing with wet gloves.