IF PUSL 10 D

Self-Smoothing Epoxy Polyurethane Floor Topping

IF PUSL 10 D is a specially formulated, self-smoothing epoxy polyurethane resin floor finish that combines exceptional wear resistance with chemical durability and aesthetic appeal. This flooring system is ideal for environments where a seamless, joint-free finish is critical, such as laboratories, clean rooms, and light industrial spaces.

Available Pack Sizes

25Kgs

Coverage

4.5 m² per coat at 1 mm thickness

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Features

Hard wearing - durable with low maintenance costs Good abrasion resistance, withstands foot and vehicular traffic Resistant to a wide range of chemicals and liquids Seamless - easily cleaned to maintain high standards of hygiene Self-smoothing properties provide a flat, high-gloss finish Hygienic.

Application

Apply the mixed IF PUSL 10 D material to the prepared and primed surface without delay, using a trowel or depth set rake to achieve the desired thickness. As the material is laid, gently roll the surface with a spiked roller to release any entrapped air and to blend out trowel marks. Protect the work area during installation and the initial curing process to prevent contamination by debris, which could result in blemishes on the finished surface.

Physical Properties
# characteristic value
1 Pot life 20 mins
2 Mixed Density 1.33-1.43 g/cc
3 Initial hardness 24 hours
4 Full cure 7 days
5 Application Thickness 1 mm
6 Shore D Hardness >70
7 Bond Strength (after 1 day) > 1.50 N/mm²
8 Compressive strength > 90.0 N/mm²
9 Flexural strength > 60.0 N/mm²
10 Tensile strength > 24.0 N/mm²
11 Mixing Ratio As specified on the container
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety