IF EU 11 P

Self Smoothing Epoxy Polyurethane Floor Topping

A specialist applied, self-smoothing epoxy polyurethane resin floor topping designed for environments requiring a seamless, joint-free finish with exceptional durability and chemical resistance. This product is ideal for laboratories, clean rooms, and light industrial settings where maintaining cleanliness is crucial.

Available Pack Sizes

16.5Kgs

Coverage

4.5 m² per 1 mm thickness

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Features

Hard-wearing and durable with low maintenance costs Good abrasion resistance, withstands foot and vehicular traffic Resistant to a wide range of chemicals and liquids Seamless and easily cleaned to maintain high standards of hygiene Self-smoothing properties provide a flat high gloss finish Hygienic.

Application

Apply the mixed IF EU 11 P material immediately to the prepared and primed surface using a trowel or depth-set rake to achieve the desired thickness. Roll the surface gently with a spiked roller to release entrapped air and smooth out any trowel marks. Protect the work area during installation and initial curing to prevent contamination from debris, dust, or insects.

Physical Properties
# Technical Data value
1 Pot Life 20 minutes
2 Mixed Density 1.33 - 1.43 gm/cc
3 Initial Hardness 24 hours
4 Full Cure 7 days
5 Application Thickness 1 mm >
6 Shore D Hardness > 70
7 Bond Strength 1.50 N/mm² after 1 day
8 Compressive Strength > 90.0 N/mm²
9 Tensile Strength > 24.0 N/mm²
10 Flexural Strength > 60.0 N/mm²
11 Mixing Ratio As specified on the container
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety