Clicrete HD

Rake and Trowel Grade High Polyurethane Screed

Clicrete HD is a specialist-applied, polyurethane resin floor finish that combines outstanding wearing properties with high chemical resistance and decorative properties. Ideally suited for aggressive areas where a seamless, joint-free finish is required and maximum cleanliness is essential.

Available Pack Sizes

18.88Kg

Coverage

2.3 m² applied at a thickness of 5 mm

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Key Features

Easily applied by rake and trowel Hard wearing - extremely durable and abrasion resistant with low maintenance cost Facilitates rapid application Resistant to a wide range of chemicals and liquids Independently tested - suitable for use in food and drinks production environments Seamless - easily cleaned to maintain high standards of hygiene Resistant to thermal shock - at 9 mm thick can withstand steam cleaning regimes.

Application Guidelines

Surface Preparation The concrete or screed substrate must be hard, sound, and free of dust and other barrier materials such as paint, lime coatings, plaster, curing agents, laitance, adhesive residues, etc., that will inhibit adhesion to the substrate. Use a suitable degreaser to remove polish, wax, grease, oil, and similar contaminating substances before mechanical preparation. Contaminated concrete surfaces should be mechanically prepared, either by scabbling, grinding, or contained shot blasting equipment or similar, and be vacuumed clean before applying Clicrete HD. Overwatered or otherwise weak concrete surfaces must also be suitably prepared down to sound, solid concrete by mechanical methods. Dust and other debris should be removed using vacuum equipment.

Technical Specifications
# characteristic value
1 Pot life 20 mins
2 Light traffic 24 hours
3 Full traffic 48 hours
4 Full cure 7 days
5 Bond strength >1.5N/mm2
6 Compressive strength 53 N/mm2
7 Flexural strength 12 N/mm2
8 Tensile strength 7 N/mm2
9 Shore D Hardness 75
10 Abrasion resistance Classified 'Special Duty' under BS 8204: Part 2: 2002(9)
11 Slip resistance Classified 'Satisfactory' under BS 8204: Part 2: 2002(9), wet and dry
12 Impact resistance Classified 'High Impact Resistance' under BS 8204: Part 1: 1999
13 Mixing Ratio As specified on the container
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety