IF 2 E|Solvent Based Epoxy Primer| Carbolink

Key Features

Two-component solvent-based epoxy primer.
Ideal for use on dry concrete and dry sand cement screed surfaces.
Enhances bonding efficiency on very porous surfaces with multiple coats.
Suitable for internal applications.

Recommended Uses

Designed for internal use where surfaces are dry and porous. Applicable on new concrete or where the relative humidity (RH) of the substrate is in excess of 75%. Use CLI DPM Surface Damp Proof Membrane in high RH conditions.

Technical Specifications

#	characteristic	value
1	Working Time	2 hours
2	Walkability	24 hours
3	Overcoating	After 24 hours
4	Bond Strength	>2.0 N/mm² after 7 days
5	Curing Time	24 hours at 27 ± 1°C

Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

IF 2 E

Solvent Based Epoxy Primer

15Kgs

24 m² per coat

-

Guaranteed Reliability

Unbeatable Value

Certified Quality