IF 25 CU

Epoxy Modified Cementitious Floor Screed

IF 25 CU is a specialized, self-leveling, epoxy-modified cementitious floor screed. It is designed to deliver exceptional durability with enhanced chemical resistance and decorative properties. This product is ideal for areas demanding a seamless, joint-free finish with maximum cleanliness, such as clean rooms and light industrial environments.

Available Pack Sizes

21.80Kgs

Coverage

7.0 m² @ 2 mm thickness

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Features

Toxic-free and solvent-free for safe interior applications. Exceptional resistance to wear and abrasion, ensuring longevity. Excellent slip resistance suitable for both vehicular and foot traffic. Compatible with cementitious toppings and applicable on damp concrete surfaces. Provides the combined strength of both cement and epoxy.

Application

Apply the mixed IF 25 CU material to the prepared and primed surface immediately using a gauged notched trowel or depth-set rake to achieve the desired thickness. Complete one kit application (troweling and rolling) within 8-10 minutes at 30°C, including mixing time. After laying IF 25 CU, gently roll the surface with a spiked roller to release any entrapped air and smooth out any trowel marks. Avoid excessive rolling; one-time rolling in both directions is sufficient. Protect the work area during installation and initial curing to prevent contamination by debris, which could cause blemishes on the hardened surface.

Physical Properties
# Characteristic Value
1 Pot life 30 minutes
2 Mixed Density 1.77 - 1.82 g/cc
3 initial Hardness 24 hours
4 Full Cure 7 days
5 Application Thickness 2-4 mm
6 Mixing Ratio As specified on the container
7 Bond Strength After 7 Days: >1.5 N/mm²
After 28 Days: >2.5 N/mm²
8 Compressive Strength After 7 Days: 26.00 N/mm²
After 28 Days: 31.00 N/mm²
9 Tensile Strength After 28 Days: 3.8 N/mm²
10 Flexural Strength After 28 Days: 8.00 N/mm²
11 Shore D Hardness After 28 Days: >70
12 Coverage Estimates Coverage: Approximately 7.0 m² @ 2 mm thickness
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety