IF 20 (WB)

Water - Based Epoxy Coating

IF 20 (WB) is designed to create an easy-to-clean surface with excellent adhesion to concrete and cement/sand screeds. It is particularly suitable for floors in garages, warehouses, light industry, and other areas subject to light vehicular and pedestrian traffic.

Available Pack Sizes

10Kgs

Coverage

250grams/sq metre/coat.

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Features

Low odor, cost-effective floor maintenance coating Enhances durability of concrete surfaces.

Substrate Preparation

The concrete surface must be hard, sound, and free of dust or other materials that could hinder adhesion, such as paint, lime coatings, plaster, curing agents, laitance, or adhesive residues. Use an appropriate degreaser to remove contaminants like polish, wax, grease, and oil before mechanical preparation. Contaminated surfaces should be mechanically prepared using methods such as scabbling, grinding, or shot blasting, followed by thorough vacuuming. For overwatered or weak concrete surfaces, ensure preparation down to solid, sound concrete. Joints or cracks in the concrete base where differential movement is expected should be addressed before the final application. New concrete slabs must cure for at least 30 days before applying IF 20 (WB).

Physical Properties
# Characteristic Value
1 Pot life 30 minutes
2 Time Between Coats 8 - 24 hours
3 Foot Traffic 24 hours
4 Full Cure 7 days
5 Dry Film Thickness: Approximately 100 microns per coat
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety