IF 19 EP

Self-Smoothing Epoxy Floor System

IF 19 EP is a specialist applied, self-leveling, epoxy resin floor finish that combines outstanding wearing properties with chemical resistance and decorative properties.

Available Pack Sizes

16.5Kgs

Coverage

16 kg: Approximately 4.70 m² @ 2 mm thick
11 kg: Approximately 7.5 m² @ 1 mm thick

Application Areas

-

Features

Hard wearing, durable with low maintenance costs Resistant to a wide range of chemicals and liquids Seamless, easily cleaned to maintain high standards of hygiene Self-smoothing properties provide a flat high gloss finish

Application

The mixed IF 19 EP material should be applied to the prepared and primed surface without delay using a trowel or depth set rake to achieve the desired thickness. As soon as IF 19 EP has been laid, and as work progresses, the surface should be gently rolled with a spiked roller to release any entrapped air from the mix and blend out any trowel marks. The work area should be protected during the installation process and during the initial curing time to ensure that no debris contaminates the surface of the resin, as this will lead to unwanted blemishes in the hardened, cured surface.

Physical Properties
# characteristic value
1 Pot Life 30 mins
2 Initial Hardness 24 hours
3 Full Cure 7 days
4 Bond strength > 1.5 N/mm²
5 Compressive Strength 70 N/mm²
6 Flexural strength 31 N/mm²
7 Tensile strength 23 N/mm²
8 Shore D Hardness >70
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety