IF 18 EP

Epoxy Self Leveling Screed

IF 18 EP is a specialist-applied, self-leveling epoxy resin floor finish that combines exceptional durability with chemical resistance and decorative appeal. It is ideal for environments where a seamless, joint-free finish is necessary and where cleanliness is critical, such as clean rooms and general light industry settings.

Available Pack Sizes

16Kgs

Coverage

5.0 m² at 2 mm thickness

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Features
  • Highly durable with low maintenance costs.
  • Excellent resistance to a wide range of chemicals and liquids.
  • Seamless finish, easily cleaned to maintain high hygiene standards.
  • Self-smoothing properties provide a flat, high-gloss finish
Application

The mixed IF 18 EP should be immediately applied to the prepared and primed surface using a trowel or depth set rake to achieve the desired thickness As the material is applied, gently roll the surface with a spiked roller to release any trapped air and blend out trowel marks. Protect the work area during installation and the initial curing phase to prevent debris from contaminating the resin surface, which could cause unwanted blemishes.

Physical Properties
# characteristic value
1 Pot Life 60 mins
2 Initial Hardness 24 hours
3 Full Cure 7 days
4 Application Thickness 2-4 mm
5 Compressive Strength 78 N/mm² (EN 13892-2)
6 Tensile Strength 11 N/mm² (BS 6319 Part 7)
7 Bond Strength > 1.5 N/mm²
8 Water Absorption < 1%
9 Shore D Hardness: > 80
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety