Hard-wearing, extremely durable Good abrasion resistance with low maintenance costs Seamless, easily cleaned to maintain high standards of hygiene Easy to apply.

For coving applications, the mixed material should be applied to the prepared and primed tacky surface without delay using a trowel to achieve the desired thickness and coving profile. Note: Do not overwork the surface or mix more than can be used within the working time.The work area should be protected during the installation process and the initial curing time to ensure no airborne debris contaminates the surface of the wet resin, as this will lead to unwanted blemishes in the hardened, cured surface. All movement joints in the substrate must be carried through the coving render and properly sealed. Construction joints and cracks not subject to movement may be overlaid, but should the substrate move, these defects will reflect through the coving render. Isolation joints will need to be allowed for in areas where high thermal movement is anticipated, such as around ovens and freezers.