TA C-3 Advanced

High polymer Modified Cementatious Tile or Stone Adhesive

Grey cement-based, high-performance, high-strength adhesive for fixing tiles/stones. The set adhesive is water-resistant and suitable for use in wet areas like swimming pools and water bodies. TA C3 Advanced Grey is ideal for fixing vitrified tiles, industrial-grade tiles, and natural stones on walls/floors in interior/exterior situations up to 6mm bed thickness (can be extended up to 12 mm in areas of limited extent).

Available Pack Sizes

40Kgs, 25Kg & 10Kgs

Coverage

1.30 - 1.40 kg/m²/mm

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Features
  • Very high bond strength.
  • Non-slip .
  • Water resistant.
  • Easy mixing, smooth application & better workability.
  • Enhanced flexibility & adhesion can be obtained with the addition of ADMIX AD1 (latex additive).
PHYSICAL PROPERTIES @27±2°C
# Characteristic Value
1 Bed Thickness 2-6 mm (can be extended up to 12 mm in areas of limited extent)
2 Pot Life 3 hours
3 Setting Time 24 hours
4 Temperature Resistance -30°C to 150°C
5 VOC Content 1.26 g/L
Properties as per IS 15477:2019@27 ± 2°C Property with Test Method
# Property Min. Requirements Typical Result
1 Tensile Adhesion Strength (as per Annex A)- Dry Condition 1.5 N/mm² >1.5 N/mm²
2 Tensile Adhesion Strength (as per Annex A)- Wet Condition 1.00 N/mm² >1.00 N/mm²
3 Shear Adhesion Strength (as per Annex B)-Dry Condition 1.5 N/mm² >1.6 N/mm²
4 Shear Adhesion Strength (as per Annex B)-Heat Condition 1.00 N/mm² >1.20 N/mm²
5 Shear Adhesion Strength (as per Annex B)-Wet Condition 1.00 N/mm² >1.00 N/mm²
6 Open time (as per Annex C) As per Manufacturer 30 mins
7 Adjustment time (as per Annex D) As per Manufacturer 20 mins
8 Slip (as per Annex E) < 0.50 mm 0.30 mm
Properties as per EN 12004: 2017 @ 23 ± 2°C
# Property Min. Requirements Typical Result
1 Tensile Adhesion Strength (Clause 8.3) - Initial ≥ 1 N/mm² > 1.30 N/mm²
2 Tensile Adhesion Strength (Clause 8.3) - After water immersion ≥ 1 N/mm² > 1.10 N/mm²
3 Tensile Adhesion Strength (Clause 8.3) - After heat aging ≥ 1 N/mm² > 1.10 N/mm²
4 Tensile Adhesion Strength (Clause 8.3) - After freeze-thaw cycles ≥ 1 N/mm² > 1.10 N/mm²
5 Open time @ 20 mins - Tensile Adhesion Strength (Clause 8.1 & 8.3) ≥ 0.50 N/mm² > 0.60 N/mm²
6 Slip (T) (Clause 8.2) ≤ 0.50 mm 0.30 mm
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety