CM 40P

Single Component, Pre-packed Polymer Modified Cement Mortor

CM 40P is a ready-to-use, high-quality, polymer-modified cement mortar designed to offer a durable, self-curing plastered surface.

Available Pack Sizes

40Kgs, 25Kgs & 10Kgs

Coverage

Lightweight Blocks: 17-18 sft (10-12mm), 11 sft (18mm)
Brick Wall: 14-15 sft (10-12mm)
RCC: 20-22 sft (12-15mm)

Application Areas

-

Technical Data Sheet(TDS)
MSDS
Order Now
Product Features
  • Pre-mixed and Ready-to-use: Just add water at the site.
  • High Durability:Provides a strong, long-lasting surface.
  • Self-Curing: Eliminates the need for water curing.
  • Reduced Wastage: Minimizes shrinkage, leakage, and cracks.
  • Consistent Quality: Automated blending ensures uniformity in every batch.
  • Easy Application:Enhances work efficiency with simple mixing and application.
Application Instructions
  • Surface Cleaning: Ensure the surface to be rendered is clean, free from dust, loose materials, grease, oil, and other contaminants.
  • Wetting the Wall:Thoroughly wet the surface for a few hours before application.
  • Mix Preparation:Add 6-7 liters of water to 40 kg of CM 40P and mix thoroughly.
  • Allow to React: Let the mixture sit for 5-10 minutes, then remix before use.
  • Mixing: Mix the mortar using a machine or by hand for 5-10 minutes until a uniform consistency is achieved.
  • Application: Apply the first coat with a thickness not exceeding 12-15 mm. Ensure the lower coat is thicker than the upper coat.
  • Second Coat: If applying a second coat, roughen the previous coat before it fully hardens to ensure better adhesion.
  • Leveling: After the final coat, use appropriate tools to ensure proper leveling.
  • Self-Curing: CM 40P is a self-curing plaster and does not require additional water curing.
  • Health and Safety Precautions: This product is non-toxic and non-hazardous. It is recommended to use gloves, a dust mask, and goggles during application. In case of contact with skin or eyes, wash with plenty of clean water. Seek medical attention if irritation persists.
Technical Specifications
# Property Value
1 Appearance and Color Free-flowing granular grey powder
2 Binder Ordinary Portland Cement with Pozzolanic materials
3 Fillers Processed fine aggregates (purified, graded, and proportioned quartz)
4 Maximum Aggregate Size 3.00 mm
5 Additives Proprietary additives to enhance performance, including water retention, strength, durability, anti-sagging, and adhesion strength
6 Water Demand 6.00 - 7.00 liters per 40 kg bag
7 Pot Life 60 - 90 minutes
8 Plaster Thickness 6 mm to 20 mm (One coat/layer should not exceed 13-15 mm per day)
9 Practical Consumption 20-22 sq. ft. per 40 kg bag for an average thickness of 10 mm -
Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Guaranteed Reliability

We design our materials for exceptional lifespan and unwavering reliability.

Unbeatable Value

Exceptional Performance at an Outstanding Price

Certified Quality

Meeting Industry Standards for Performance and Safety