• Simple and economical to apply.
• Cost-effective solution.
• Free from any chloride component.
• Effective in removing rust, even from hard-to-reach areas.
• Excellent for equipment and structural rust removal.

Apply C 10 using a soft cloth, brush, or pad, ensuring that the tool used will not damage the surface. Use light, circular motions to apply a thin, even coat of the emulsion, working against the grain of the wood. In areas that are difficult to reach, such as spindles or carved details, use rags, special pads, or foam brushes. Allow the wax to set on the surface for 5-7 minutes, then buff with a clean, soft cloth. For detailed areas, a furniture brush may be required to achieve a thorough buff. Apply a second coat of wax, this time working with the grain, using the same method of light, circular motions. Allow the second coat to set for 60-75 minutes before buffing again. For best results, allow the treated surface to sit overnight before giving it a final buff. Note: Additional layers of wax will enhance the gloss of the finish. Avoid using conventional varnish systems over a wax-treated surface unless the wax is completely stripped.

C 10 is available in 500-gram steel cans, suitable for use in tropical climates where temperatures may exceed 30°C. The product has a shelf life of 2 years when stored in its sealed state at ambient temperatures..