Meta Kote 16P

Characteristics/Advantages

Corrosion resistant, resistant to saline environments, good chemical resistance, weatherproof, UV resistant, color stable and non yellowing, easy to apply, glossy finish, low dirt pick up.

Meta Kote 16P is recommended for usage as a protective coating on structures such as:

Cooling towers, bridges and flyovers in marine locations, chimneys, wastewater treatment plants, chemical manufacturing plants, metal structures in marine areas.

Product Information

#	Characteristic	Value
1	Appearance/Color (Part A + B mixed)	Glossy colored liquid Part A: Colored liquid Part B: Colored liquid Available in various RAL shades
2	Shelf Life	12 months from the date of production
3	Storage Conditions	Store properly in undamaged and unopened original sealed packaging in cool and dry conditions. Protect from direct sunlight and frost
4	Drying Time	Surface Dry - 25 minutes, Hard Dry - 60 minutes
5	Adhesion to Concrete	Surface failure
6	Mixing Ratio	As specified on the container
7	Theoretical Coverage	3 m²/L on a properly cleaned surface
8	Coating Interval	Minimum 50 minutes, Maximum 24 hours
9	Finish	Glossy to bright matte
10	Hardness (Shore A)	> 90
11	Adhesion to Steel	Excellent

Technical Information

#	Characteristic	Value
1	Tensile Adhesion Strength:	≥1.5 N/mm² on concrete substrate
2	Resistance to UV Exposure:	Excellent, no discoloration
3	Behavior after Artificial Weathering:	No sign of chalking, checking, spotting, flaking, blooming, or corrosion when tested for 1440 hours

Application Information

#	Characteristic	Value
1	Mixing Ratio	Part A B = 9:1 (By weight)
2	Consumption	~0.15 kg per m² per coat depending on the porosity of the substrate
3	Layer Thickness	~150 microns in 2 coats
4	Ambient Air Temperature	+10°C min / +40°C max
5	Relative Air Humidity	70% max
6	Dew Point	Beware of condensation; the substrate must be at least 3°C above the dew point
7	Substrate Temperature	+10°C min / +40°C max
8	Substrate Moisture Content	≤4% as measured with a Tramex CME/CMExpert type concrete moisture meter
9	Pot Life	10-15 minutes at +30°C
10	Waiting Time/Overcoating	6 hours at +30°C & relative humidity 75%
11	Dry Time	Touch dry ~24 hours, Full cure ~7 days

Data Reliability

All technical data provided in this document are based on laboratory tests. Actual performance may vary due to factors beyond our control.

Regional Compliance

Product specifications may vary based on local regulations. Please refer to the local Product Data Sheet for precise information.

Legal Disclaimer

The information and recommendations regarding the application and end-use of Carbolink products are provided in good faith based on our current knowledge and experience. Due to variations in materials, substrates, and actual site conditions, no warranty of merchantability or fitness for a specific purpose can be inferred. The user must determine the product's suitability for the intended application. Carbolink reserves the right to change the properties of its products. All proprietary rights of third parties must be observed. Orders are subject to our current terms of sale and delivery. Always refer to the most recent local Product Data Sheet, available upon request.

Two-Component PU Anti-corrosive Coating.

10Kgs

-

-

Guaranteed Reliability

Unbeatable Value

Certified Quality