ADVANTAGES

• Outstanding visibility.
• High durability
• Excellent adhesion
• High skid resistance
• Product Stability
• Superior color brilliance
• Fast drying properties
• Environment friendly
• Cost effective

APPLICATION

• Applicable on bitumen and concrete pavement with screed / spray type applicator.
• Applicable on Zebra Crossing, path dividers, speed breakers and other such road markings.

APPLICATION METHODOLOGY

• Remove dust, flakes, lime, distempers, oil / grease or other foreign particles by jet or dry air and clean the surface. Minimize dusting of the material during use.
• Ensure that surface is sound, firm, bone dry.
• Apply the suitable primer in case of concrete roads.
• Add one bag of RM 31P in pre-heater and allow it to melt.
• Keep on adding RM 31P one bag at a time and allow it to melt before adding another bag, depending upon the capacity of pre-heater.
• Do not allow temperature to rise beyond 210 ⁰C. Ideally melt RM 31P between 180 - 210 ⁰C. • Offload the hot melted RM 31P in application unit and keep on stirring it with in-built stirrer of application unit.
• Mark reference line on surface with nylon rope and chalk prior to application.
• Apply melted RM 31P within the reference lines by the application unit.
• Type II Drop – On glass beads (BS 6088) shall be dispensed from the in-built dispenser of application unit @ 250- 300 grm/m2 simultaneously.
• Finish lines shall be true to level, uniform and free from streaks.
• If the application can not be done using application unit, approved manual method shall be adopted.
• Proper safety measures shall be taken to ensure smooth progress of work.

CHARACTERISTICS

HEALTH & SAFETY

• Minimize dusting of RM 31P during use.
• Use goggles and hand gloves during application.
• Clothing while handling the material is recommended.
• Clean hands with warm soap water after application.
• Do not inhale RM 31P or fumes, do not ingest.
• Avoid eye contact, if contacted, wash copiously with water.
• Contact of molten product with skin would lead to thermal burns, flush with cold water, do not remove material as it would lead to severe tissue damage.

PACKING

Available in 25 kg HDPE bag.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat.The product shelf life is12 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.