FEATURES

• Water based, environmentally friendly.
• It reduces damage.
• Suitable for all types of shutters and moulds.
• Fast working progress.
• Stain free.
• Easy application.

SURFACE PREPARATION

The surface to be treated should be clean, free from other contaminations substances prior to the application. Used moulds must be thoroughly clean and free from old mortar residues, dust, cement stains.

APPLICATION AND MIXING

C 10 should be stirred well before use. Dilute 1 part of C 10 with 4 parts of water, apply by using brush or conventional sprayer. If oil sprayer is used, It is important that a fine nozzle be fitted, as this should be applied in thin film and get the best results. Remove the excess material by sponge or cloth, Otherwise the surface retardation of the concrete will occur.

PROPERTIES

The values shown are typical of results obtained in the laboratory at 27 ± 1ºC. Actual performance values obtained on site may vary from those quoted

CHARACTERISTICS

COVERAGE ESTIMATES

STORAGE AND SHELF LIFE

C 10 has a shelf life of 12 months if kept in a dry, store between 5ºC and 30ºC in the original unopened containers. The product should be protected from frost, away from direct sunlight and sources of heat.

PRECAUTIONS

In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice and after contact with the skin wash immediately with plenty of soap and water (do not use solvents). Prolonged contact with the skin should be avoided, especially where the user has an allergic reaction to epoxide materials. Always wear gloves and eye/face protection is necessary. Observe personal hygiene, particularly washing the hands after work has been completed or at any interruption whilst work is in progress. Care should be taken when removing gloves to avoid contaminating the insides. In case of accidents seek medical advice.

DISPOSAL / SPILLAGE

Spillage of any of the C 10 product should be removed with plenty of water. Disposal of such product or empty packaging should be in accordance with local waste disposal authority regulations.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.