ADVANTAGES

For Priming surface in case CLI Coat AC - 31(S).

APPLICATION

Used as primer for concrete surface.

APPLICATION METHODOLOGY

• Surfaces to be sealed must be dry, structurally sound, and free from grease, oil, dirt and other contamination. Remove any curing compound or releasing agents prior to coating. Use compressed air to remove dust and other loose particles. Ensure that the surface is not saturated with water prior to application.
• Mix well before application, to ensure that there is no sedimentation.
• A low pressure, airless sprayer is the preferred method of application. But a brush or roller may also be used for coating. Material should be applied to assure uniform coverage. Apply CLI Prime AC - 31B primer as per the coverage. Allow the primer to dry for at least 4 -5 hours before over coating .

CHARACTERISTICS

CLEANING & MAINTENANCE

Tools, equipment and general clean-up can be done with Xylene or Toluene.

HEALTH & SAFETY

• Use mask, nose cover and hand gloves during application.
• Clean hands with soap water after application.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice. Do not use solvent to clean the contacted area.
• Prevent swallowing. In case of unlikely swallowing, seek medical attention immediately. Do not induce vomiting.

PACKING

Available in 20 L pack.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat. The shelf life of product is 9 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.