CURING COMPOUNDS

CLI CURE AC - 31C

ACRYLIC CURING AND SEALING COMPOUND

DESCRIPTION

CLI Cure AC - 31C is a high solids copolymer that cures concrete and provides a protective coating for interior and exterior concrete including terrazzo surfaces. It bonds tenaciously to concrete forming an inert, impervious film that is resistant to the alkali from fresh cement, salts and many construction stains. It impregnates the top surface of a floor, making it highly resistant to the penetration of dirt and staining materials. CLI Cure AC - 31C complies to ASTM C 309 Types 1 & 1D, Class B.

know more

ADVANTAGES

• Higher solids content for increased curing efficiency.
• Provides a clear curing film for new concrete.
• Seals all concrete surfaces – old or new and easy to clean.
• Hardens new concrete by promoting a proper cure for improved abrasion resistance.
• Dustproofs concrete by impregnating surface pores with tough durable film.
• Protects fresh concrete from rain damage after drying.
• Compatible with many paints, adhesives, and resilient floor coverings.

APPLICATION

• Industrial Floor Slabs
• Parking Garages
• Exterior Pavements and roads
• Warehouses
• Walls and Columns
• Dry Shake Hardened Floors
• Terrazzo Floors
• Passenger and freight Terminals

APPLICATION METHODOLOGY

• For the best cure of freshly placed concrete, apply CLI Cure AC - 31 C as soon as possible after finishing operations and / or immediately after the disappearance of the “sheen” of surface moisture. Application should be made with a high pressure industrial sprayer, lambs wool applicator, short nap roller or brush. Do not cover more area than can be worked in 10 minutes as the CLI Cure AC - 31C membrane will start to dry.
• When sealing old concrete, the surface must be clean and dry. Remove contaminants and stains such as waxes, grease and oil with strong soaps or caustics rather than acids. Badly worn or porous areas may need a second application to attain a uniform seal and surface gloss. Apply CLI Cure AC - 31C with a high pressure industrial sprayer, lambs wool applicator, short nap roller or brush.
• Use 2 coats of CLI Cure AC - 31C Acrylate.
• Do not apply to concrete surfaces or at ambient temperatures below 10 °C.
• Do not apply over bleed water or free standing water.

CHARACTERISTICS

Drying time

< 1 Hr

Alkali Resistance 48 hrs Exposure

Passes

Flash Point

43 °C

Adhesion to Concrete

Passes

Theoretical Coverage, m2L

4 - 6 in two coats

Total solid, %

30

Salt spray, 500 hrs exposure

Passes

Solvent Resistance

Minimal

Adhesion to Asphalt Tile

Passes

HEALTH & SAFETY

• Use mask, nose cover and hand gloves during application.
• Clean hands with soap water after application.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice. Do not use solvent to clean the contacted area.
• Prevent swallowing. In case of unlikely swallowing, seek medical attention immediately. Do not induce vomiting.

PACKING

Available in 20 L and bulk pack.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat. The shelf life of product is 9 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.

VIEW OUR BROCHURE LIBRARY