CHLORIDE / SULPAHTE FREE LIQUID RUST REMOVER
RR - 18C is chloride and sulphate free liquid rust remover. It effectively removes rust from steel surfaces. Preferably, RR - 18C is applied before application of any protective coating
ADVANTAGES
• Simple, economical, cost effective and easy to apply.
• Contains corrosive, being free from any chloride component.
• Effective rust remover, even removes from areas difficult to reach.
• Excellent for equipment and structural rust removal.
APPLICATION
• Steel structures.
• Tanks.
• Water pipelines.
• Shuttering plates.
• Other steel surfaces.
APPLICATION METHODOLOGY
• Remove dust, flakes, or other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application.
• Thoroughly dust down the surfaces.
• Remove majority of rust scales from surface of rusting steel structure / reinforcement by wire brush, chipping or grinding.
• Ensure that the substrate temperature is in the range of 5 °C – 40 °C.
• Apply RR - 18C on affected surface by using cotton waste swab or by brush.
• Leave the surface coated with RR - 18C for atleast 15 to 30 minutes.
• Rusty surface will change its colour to original blackish steel.
• Then remove the loose rust particles by scrubbing or simple dusting with brush.
• Still if any rust remains on surface of steel, apply second coat of RR - 18C on bone dry first coat.
• When applied over corroded reinforcement steel, wash the surface with clean water before taking up further works of repairs.
• RR - 18C is acidic in nature, when applied to clean rusted rebars. Ensure that traces of acid are removed completely with water jet before applying coatings or primers.
• Do not apply RR - 18C to clean rusted rebars in critical RCC structures.
CHARACTERISTICS
Specific Gravity
1.18 ± 0.02
Theoretical Coverage, kg/m2
0.12 to 0.15
Nature
Acidic
Colour
Light Pink
HEALTH & SAFETY
• Use mask, nose cover and hand gloves during application.
• Clean hands with soap water after application.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice. Do not use solvent to clean the contacted area.
• Prevent swallowing. In case of unlikely swallowing, seek medical attention immediately. Do not induce vomiting.
PACKING
Available in 1 Kg container.
STORAGE AND SHELF LIFE
Store in a cool dry place under shed away from heat. The shelf life of product is 12 months in original unopened sealed condition.
CONDITIONS OF SALE
Sold subject to the Company's conditions of sale which are available on request.
NOTE
The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.