ADVANTAGES

• Better adhesion and flexibility.
• Etches the metal surfaces.

APPLICATION

• Galvanized / metal sheet.

APPLICATION METHODOLOGY

• Ensure that surface is clean before applying CLI Prime ET 32. Remove any dirt, oil, grease etc.
• Mix Comp. A into Comp B and stir thoroughly to achieve a homogeneous mix.
• Apply CLI Prime - ET32 by brush, conventional or airless spray.

CHARACTERISTICS

HEALTH & SAFETY

• The product should not come in contact with the skin and eyes, or be swallowed.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Wear suitable protective clothing, gloves and eye protection.
• In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area.
• In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
• If swallowed seek medical attention immediately - do not induce vomiting.

PACKING

Available in 5 L container.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat. The shelf life of product is 6 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.