ADVANTAGES

• Easy to Apply.
• Economical.

APPLICATION

• Protection of steel structures in aggressive coastal & industrial atmosphere.
• Ship loaders.
• Hoppers, conveyors silos, storage tanks, pipelines and general steel structures in fertilizer plants, refineries, petrochemicals, chemical plants, engineering industries, etc.

APPLICATION METHODOLOGY

• In case of new steel surface, blast clean to a minimum surface profile not exceeding 65 microns.
• In case of old steel surface, blast clean and if blast cleaning is not practical, use mechanical tools along with manual chipping and wire brushing to remove loose rust. Excessive burnishing of steel is to be avoided. Thoroughly dust down the surfaces. Remove grease, oil and other contaminants preferably by using CLI thinner.
• Apply CLI COAT MIO on touch dry cleaned and primed steel surface.
• Stir the Comp A and Comp B separately. If settling is observed in the Comp A, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing. Mix hardener gradually into the base under continuous stirring.
• Continue mixing till a homogeneous mix is achieved.
• Apply mixed material by brush or roller.

CHARACTERISTICS

HEALTH & SAFETY

• Use mask, nose cover and hand gloves during application.
• Clean hands with soap water after application.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice. Do not use solvent to clean the contacted area.
• Prevent swallowing. In case of unlikely swallowing, seek medical attention immediately. Do not induce vomiting .

PACKING

Available in 20 L container.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat. The shelf life of product is 12 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.